SCP with the Touch Screen


By default, the Super Control Panel is accessed with EVF Side button, and the options are accessed by the 4-way control.

If you want to use the touch screen to change the common setting, follow these directions.

A side note, you can use the front dial to select the various options with each function. That Is: Touch the Metering Mode, (it will highlight yellow-green), and turn the front wheel to select the metering mode you want. No need to push OK, it is set without it. to set the pattern back to whatever, “Press OK” again, and turn the front wheel to whatever pattern you want.

All the SCP function buttons work the same way… A PLUS: Fn2 (Lower Right) can also be cycled through various custom functions. I find that more useful then menu digging when I want to switch Fn2 functions more quickly.

STEP 1:  Menu/Gears/D/Press OK for next screen

Step 2: /…../Control Settings/Press OK for next screen

Step 3: /…./Control Settings/P/A/S/M/Press “Right Arrow” (>) for next screen

Step 4: /……/P-A-S-M/

  • Live Control = OFF
  • Live SCP = ON

5 thoughts on “SCP with the Touch Screen”

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Olympus OM-D resources in one central location

%d bloggers like this: